|
|
|
|
 |
Directed 8601 (Was 633T) Magnetic Switch
|
|

Directed 8601 (Was 633T) Magnetic Switch
|
- Directed 8601 (Was 633T) Magnetic Switch
- One of the only switches with both open and closed contacts
- Great for pick-ups with sliding rear window
|
|
|
 |
|
|
|
|
 |
Directed 451M Door Lock Relay Module
|
|

Directed 451M Door Lock Relay Module
|
Pre-wired door lock relay assembly. This great time-saver also comes with resistors for some new-model vehicles. Requires alarm-supplied momentary negative pulses. Plugs into most Directed Electronics systems. (Two 40-amp relays built-in.)
- Door Lock Relay Module with Resistors DEI 451M
- Compatible with most Directed Electronics systems
- 3-Pin Plug Interface with DEI system
- Will interface with most electric power door lock systems drawing 30A or less.
- Both relay-controlled and direct-wired reversing-polarity types.
|
|
|
 |
|
|
|
|
 |
Directed 524CL Cable Lock Bracket Kit (2-Pack)
|
|

Directed 524CL Cable Lock Bracket Kit (2-Pack)
|
These Cable Door Lock Bracket are for Vehicles that have cable door
lock systems. Converting to power door locks proved very difficult to install
until now.
- Allows aftermarket actuators to work with cable door lock systems
- Each kit operates 2 doors: Hardware included to convert 2 cable door locks
for aftermarket power locks
- Allows aftermarket actuators to work with cable door lock systems found in
many newer Ford, Toyota, GM and Honda vehicles
- Does not include actuators
- Includes module, wiring harness and installation guide
|
|
|
 |
|
|
|
|
 |
Directed 524T Door Lock Actuator 2-Wire
|
|

Directed 524T Door Lock Actuator 2-Wire |
- Standard door lock motors for adding power door locks to most vehicles.
|
|
|
 |
|
|
|
|
 |
Directed 524N High Power Door Lock Actuator 2-Wire
|
|

Directed 524N High Power Door Lock Actuator 2-Wire |
- Add power door locks to most vehicles
- Attaches to the lock rod assembly with wires that connect to the door lock relays
- Super heavy-duty lock motor pulls up to 10 lbs.
|
|
|
 |
|
|
|
|
 |
Directed 524F High Power Door Lock Actuator 5-Wire
|
|

Directed 524F High Power Door Lock Actuator 5-Wire |
- Super heavy-duty door lock motors for adding power doorlocks to most vehicles. New compact, low friction design can pull up to 10 lbs. 524F can be used in conjunction with the 454T to create central locking. Deluxe 5 Wire Motor (includes hardware and wire)
|
|
|
 |
|
|
|
|
 |
Directed 520T 12 Volt Backup Battery System and Sensor
|
|

Directed 520T 12 Volt Backup Battery System and Sensor |
Provides additional security if a thief tries to disconnect your vehicle battery
- Alarm battery backup and sensor system
- Battery triggers alarm when vehicle's battery is disconnected
|
|
|
 |
|
|
|
|
 |
Directed 522T Trunk Release Solenoid
|
|

Directed 522T Trunk Release Solenoid
|
- Electronic Trunk / Hatchback Release Kit
- Integrates Your Trunk Into Your Vehicle Security System
|
|
|
 |
|
|
|
|
 |
XpressKit XKLOADER2 Bypass Module Firmware Loader
|
|

XpressKit XKLOADER2 Bypass Module Firmware Loader
|
XKLOADER2 is the 2nd generation USB computer interface (Bootloader)
that acts as a bridge between your pc & an XPRESSKIT upgradeable vehicle
interface module. VIP (Vehicle Interface Program) provides the user interface
needed to update and/or change the vehicle firmware. VIP includes a critical
update alert which informs you if a newer version of vehicle firmware is
available. XLOADER2 was designed to support faster & more powerful,
processors such as the FlexRay compatible processors from NXP
- More powerful encryption scheme, faster download speed and higher current
output
- Direct Plug and play compatible with the new CANMAX400 and CANMAX400DEI
Series
- Plug & play with Windows Vista 32 & 64, XP and Windows 2000 O/S
- Upgrade any Xpresskit anytime from anywhere (internet access is required)
- Auto detects installed firmware and alerts user of any critical updates
- Flash and re-flash any available firmware
- VIP (Vehicle Interface Program) provides the user interface needed to update
and/or change the vehicle firmware
- Designed to support faster and more powerful processors
- Package included: XKLOADER2 module, USB cable, D2D cable, Install guide
|
|
|
 |
|
|
|
|
 |
XpressKit PKALL Data Transponder ALL Interface
|
|

XpressKit PKALL Data Transponder ALL Interface
|
The PKALL is a data transponder bypass module that is compatible with
more than 700 vehicle models from 1998 through 2009. This module is Self
Learning and ready to install right out of the box! The PKALL is the ultimate
solution for Toyota/Lexus vehicles including push-to-start equipped models and
hybrids.
- No wires to cut at key (more reliable solution!)
- Very low power consumption (3mA compared to competitors at 13mA)
- Includes brake input/output for brake switch on Lexus vehicles with
push-to-start (no wires to cut or relays to add)
- Pre-loaded with every firmware
- Maintains security features on push-to-start vehicles while remote started
(safety shutdown)
- Compatible with old GEN1 Honda?s, Mazda?s and GM Aveo?s
- Additional Features
- Includes 2 way ED2D communication port for enhanced security of factory
immobilizer systems.
- For Toyota, Lexus, Nissan, infiniti, Ford, Lincoln, Mercury, Mazda, Honda,
Acura, Hyundai, Kia, Chevrolet, Pontiac and Suzuki. Select model years.
- Encrypted ignition data override
- Simplified install and programming. Connects quick and easy right at the
ignition column.
- Maintains the integrity of the vehicle's factory immobilizer on
push-to-start ignition systems.
- Self-Learning algorithm allows the module to self detect the type of vehicle
and adjusts automatically.
- Supports over 700 different vehicles right out of the box.
- Upgradeable firmware via the internet. (XPRESSKIT.COM website)
|
|
|
 |