The SecurView™ SV-6818.EM.II is an embedded type camera meaning that a hole must be drilled for the camera to fit into place on the car. Once the the hole is drilled the camera snaps into place leaving just the lens to be seen and giving it the appearance of a lip mount camera. The camera has selectable normal or reverse imaging, a built-in parking line display to help the driver accurately judge the distance behind the vehicle and an ultra-wide 170° viewing angle.

A hole saw bit is included with the camera kit for drilling the necessary hole required for mounting. Once the installation is complete, you won't be able to tell it's an aftermarket camera.

• Image Sensor: CMOS
• Dimensions: 1⅛"(L) × 1"(W) × 1¼"(D)
• Resolution: 420 TV Lines / 656px(H) × 492px(V)
• Minimum Illumination: 1 LUX / F1.2
• Horizontal Angle: 170°
• Vertical Angle: 90°
• TV System: NTSC / PAL
• Video Output: RCA 1.0Vp-p Composite (75 Ohm load)
• Power Source: DC 12V
• Power Consumption: 70mA
• Electronic Shutter: /50s - 1/100000s
• Gamma Correction: 0.45
• Operating Temperature: -13°F - 185°F (-25°C - 85°C)
• Waterproof: IP67 - IP68
• Night Vision: No
• Normal / Reverse Image: Yes (Selectable)
• Parking Lines: Yes (Selectable)
• Audio: No
• Camera Cable Length: 3 Ft
• Power Cable Length: 3½ Ft
• Video Cable Length: 16 Ft
• Hole Saw Size: 20 MM
• 170° Wide horizontal viewing angle
• Normal / reverse Image (Selectable)
• Parking assist lines (Selectable)
• Ultra-small and compact design makes it barely noticeable on the vehicle
• Custom shape makes it look factory installed
• Mounting hardware and wiring are all hidden behind the mounting surface once installed
• Includes 20mm hole saw bit for installation
• Constructed of aluminum and high-grade plastic
• Waterproof design